 Front
door
--Steel door with perforations
--Steel door without perforations
--Glass door with perforations
--Glass door without perforations |
Exhaust
fan kit
--Fan tray with 2 exhaust fans
(4", 48V DC, xx CFM/fan)
--On/Off switch with power on indicator and 2 feet power cord |
Rear
door
--Steel door with perforations
--Steel door without perforations
--Bolted rear panel
|
Earthing
/ Grounding bar
3mm copper with Nickel coating
rack mountable |
Removable
side panels
(Option available only in 600mm deep ETSI racks)
|
Equipment mounting hardware kit
--20/40/60 cage nuts
-- screws and washers |
Eye
bolts / lifting bolts (set of 4)
(With load spreader bars) |
Grouting
kit
--Four anchor bolts and nuts
One set supplied (by default) with all Hanut ETSI racks. |
Exhaust
fan kit
--Fan tray with 2 exhaust fans (4", 48V DC, xx CFM/fan)
--On/Off switch with power on indicator and 2 feet power cord. |
Simple
DC power distribution panel
--Rack mountable unit
(Simple DC power distribution panel can accommodate up to 12 miniature
circuit breakers) |
Premium
DC power distribution panel
(Rack mountable unit can accommodate up to 12 miniature circuit
breakers and offers 3 power sockets) |
Simple
DC power distribution panel
--Rack mountable unit
(Simple DC power distribution panel can accommodate up to 12 miniature
circuit breakers) |
19"
conversion kit
Comprises of 3 pairs of horizontal support rails, one pair of 19"
equipment mounting rails and necessary hardware (screws & nuts)
|
19"
bracket pair
allows 19" mounting equipment to be mounted in the ETSI rack |
| Fixed
shelf |
Cantilever
shelf: 275mm deep |
| Single
use cable ties |
Packing
options
--Corrugated sheet wrapping
--Corrugated sheet box
--Wooden box |
| Reusable
cable ties |
Fan
speed controller and alarm unit [coming soon]
Increases the exhaust fan speed (RPM) when it detects an increase
in temperature inside the rack. Increase in speed is proportional
to relative rise in temperature. The controller unit operates the
exhaust fans at full speed only when the temperature inside the
rack exceeds pre set temperature. In case of fan jam or failure
the unit gives an audio and visual alarm signal.
|
Remote
environment monitoring unit [coming soon]
Monitors temperature and humidity, and detects smoke and water presence
in the rack and sends report to administrator over TCP/IP link. |
