Home
Products
Prices
Our Partners
Customer References
Co-promotion offer/Reseller
Press Release
Contact Us
FAQ
Site Map
Home
>>
Prices
>>
ETSI Rack
Organization Name:
*
Contact Person:
*
Designation:
*
E-mail (1):
*
E-mail (2):
Web Site:
Phone No. (off):
*
Cell Phone:
Fax:
Billing Address
*
Delivery Address
Leave BLANK if same as billing address.
City
*
City
State
*
State
Country
*
Country
Pincode
*
Pincode
Configure ETSI rack & request price quote:
Rack Height:
2200mm (82 SU)
Other
(pl. specify in text box)
Rack Depth:
300 mm
450 mm
600 mm
Other
(pl. specify in text box)
Rack Width:
600 mm
Side Panels:
(standard) non removable side panels welded withthe rack top and
base having integrated ETSI mounting slots. With vertical cable
management loops. No ventilation slots. (Recommended)
non removable side panels welded with the rack top and base having
integrated ETSI mounting slots. With vertical cable management loops.
Louvered ventilation slots with provision for dust filter installation.
removable side panels. Available only in 600mm deep racks.
Adjustable ETSI mounting rails.
Front Door:
None
Steel door with perforations
Steel door without perforations
Glass door with perforations
Glass door without perforations
Rear Door:
None
Steel door with perforations
Steel door without perforations
Bolted rear panel
Eye bolts / lifting bolts (set of 4) with load spreader bars
Yes
No
Blanking panel / Dummy panel
Yes
No
(pl. specify blanking panel size(s))
Exhaust fan kit
Yes
No
--Fan tray with 2 exhaust fans (4", 48V DC, xx CFM/fan) , On/Off switch with power on indicator
and 2 feet power cord.
Fan speed controller and alarm unit [coming soon]
Yes
No
--Increases the exhaust fan speed (RPM) when it detects an increase in temperature inside the rack.
Increase in speed is proportional to relative rise in temperature. The controller unit operates the exhaust
fans at full speed only when the temperature inside the rack exceeds pre set temperature. In case of fan
jam or failure the unit gives an audio and visual alarm signal.
Remote environment monitoring unit [coming soon]
Yes
No
--Monitors temperature and humidity, and detects smoke and water presence in the rack and sends
report to administrator over TCP/IP link.
Equipment mounting hardware kit
Yes
No
--20 cage nuts, screws and washers
Earthing / Grounding bar
Yes
No
--Rack mountable 3mm copper bar. Nickel coated.
Grouting kit
Yes
No
--Four anchor bolts and nuts. One set supplied (by default) with all Hanut ETSI racks.
Simple DC power distribution panel
Yes
No
--Rack mountable unit. Simple DC power distribution panel can accommodate up to 12 miniature
circuit breakers.
Premium DC power distribution panel
Yes
No
--Rack mountable unit can accommodate up to 12 miniature circuit breakers and offers 3 power
sockets.
19" conversion kit
Yes
No
--Comprises of 3 pairs of horizontal support rails, one pair of 19" equipment mounting rails and
necessary hardware (screws & nuts).
19" bracket pair
Yes
No
--Allows 19" mounting equipment to be mounted in the ETSI rack.
Fixed shelf:
For 300mm ETSI rack
For 300mm 19" rack
For 450mm ETSI rack
For 450mm 19" rack
For 600mm ETSI rack
For 600mm 19" rack
Cantilever shelf:
275mm deep for ETSI rack
275mm deep for 19"rack
Cable ties (set of 10)
Reusable cable ties (coming soon)
Packing options:
Corrugated sheet wrapping
Corrugated sheet box
Wooden box
Number of racks with above configuration:
Please Insert
Please write your comments / instructions / special requirements (if any) here:
*
Required
© Hulasi Metals Pvt. Ltd., India.
All rights reserved.
Terms of use / Legal Statement
Home
|
Feedback / Comments
|
Resellers Invited
|
Site Map
|
Exchange link with us